Manufacturer of 1 Ton Gas Fired Aluminum Scrap Melting Furnace with 4000 kW Aluminum Shell for Smelting
1. Smelting Crucible Furnace Genernal Introduce
-- Use in all foundries or aluminum die casting area
– Smeltery for feeding holding furnaces or for direct casting.
-- Low heat losses through high-quality insulation
-- No exhaust system needed
-- Accurate temperature control Crucible
-- Standard design for the use of graphite crucible 2. Smelting Crucible Furnace Specification Data
| SN | Items | Date | Remarks |
| 1 | Efficient furnace capacity kg (Al) | 580 | |
| 2 | Melting Rate kg/h (Al) | 280 | Inside the crucible there is already have 1/3 molten aluminum. |
| 3 | Maximum furnace temperature ℃ | 950 | |
| 4 | Precision of molten aluminum temperature control ℃ ≤± 5 | |
| 5 | Temperature control mode | PID+Dual temperature control | |
| 6 | Crucible type and size mm OD 880, d 350mm, H 1000 | BN800
Morgen |
| 7 | Furnace surface temperature rise ℃ ≤50 | Except for the installation site of the heating tube, the discharge outlet and rising tube |
| 8 | Power Source Voltage V/Frequency HZ | 380/50 | |
| 9 | Air Pressure MPa | 0.5-0.7 | |
3. Smelting Crucible Furnace Types
