Jinan Hydeb Thermal Tech Co., Ltd.
HYDEB FOCUS ON SERVICE ALUMINUM CASTING
Add to Cart
Transfer Ladle Preheating Device Gas Fired/Electric Heating Preheating Device For Transfer Ladles Ladle Preheater
Manufacturer Gas Fired/Electric Heating Preheating Device for Transfer Ladles Ladle Preheater
USAGES
The transfer ladle preheating equipment, also known as ladle heater, is mainly used to quickly and uniformly increase the temperature of the molten aluminum ladle lining to reduce heat loss during molten aluminum pouring and prolong the service life of the molten aluminum ladle lining.
features
• Natural gas (NG) or LPG is chosen as the fuel.
• The heating speed can be adjusted within a wide range.
• Fully combusted, energy-saving and environment-friendly.
• Suitable for molten aluminum ladles of different heights.
• Equipped with a conventional high-speed gas burner and a self-preheating burner.
• Gas and combustion air pressure detection, abnormal ignition alarm.
• Heating temperature and time are controllable.
• Long open flame ignition function.
• Flame detection function.
| Items | Parameters | Remarks | |
| Modle | HBQ-230 | ||
| Heating Type | Small; Medium; Big | ||
| Max. Burning Calorific Value | 20x104 Kcal/h | ||
| Max Heating Temperature | 1100℃ | ||
| Working Heating Temperature | 0-850℃ | ||
| Heating Rate | 0-50 ℃/min Adjustable | ||
| Time to Reach Temperature | 0-60 min | ||
| Heating Temperature Uniformity | ≤50 ℃ | ||
| Lifting Power | Air Cylinder Driver | ||
| Lifting Stroke | 0-400mm | ||
| Gas | Gas Type | Natural Gas | |
| Gas Pressure | 5000 ±5% Pa | ||
| Gas Flow | ≤24 m³/h | ||
| Power | Voltage | 380 V, 3P | |
| Frequency | 50HZ | ||
| Rated Power | 3 KW | ||
| Compressed Air | Pressure | 0.5-0.7 MPa | |
| Flow | ≤50 M3/H | ||
