Jinan Hydeb Thermal Tech Co., Ltd.
HYDEB FOCUS ON SERVICE ALUMINUM CASTING
Add to Cart
Dosing Holding Furnace 500KG Siliver Aluminum Alloy Die Casting Peripheral Furnace
Aluminum Alloy Die Casting Peripheral Dosing Holding Furnace
1. Application
The dosing holding furnace is mainly used for maintaining temperature of
molten aluminum and fixed supply of aluminum during aluminum die casting.
For the furnace, aluminum is supplied by gas pressurization and an
expert-based dosing calculation procedure is adopted, realizing the
quantification of aluminum supply and high-efficiency production. The
furnace is a new-type holding furnace manufactured by the company using
our self-developed “dosing control technology” based on years of
experience in producing low pressure holding furnaces and automatic liquid
surface compression systems.
2. Features
• The molten aluminum outflows from the lower part of the molten pool, not mixed with oxidation slags on its surface.
• High dosing accuracy, the dosing accuracy<± 1.5% (by weight).
• The furnace is closed heating, minimizing the oxidation loss of molten aluminum to≤0.1%.
• The molten aluminum is of high quality owing to less hydrogen absorbed.
• The high consistency of casting weight, casting flow rate, casting speed, casting temperature and casting time
and other parameters prevents various casting factors from affecting casting quality.
• It can be equipped with an in-line air brick degassing and refining device to continuously provide high-quality molten
aluminum.
3. Parameter Data
| Furnace bath capacity | 500 Kg (AL) |
| Single aluminum tapping volume | 1-150 kg |
| Dosing accuracy | ＜± 1.5% |
| Maximum allowable pressure | 0.20 MPa |
| Rated temperature of furnace chamber | 900℃ |
| ontrol precision of molten aluminum temperature | ±2℃ |
| Molten aluminum heating rate | ≥0.5℃/min |
| Temperature rise in the furnace shell surface | ≤45℃ |
4. Pictures
5. Our Certification CE, ISO
6. Our Clients